posuiman · 9 days ago
The main motor drives the Barite Mineral Grinding Machine disc to rotate through the reducer, and the hot air enters the vertical mill body from the air inlet. The material falls through the feeding port and falls in the center of the grinding disc. Under the action of the centrifugal force, the material moves evenly from the center to the edge of the grinding disc, and the powder passes through the grinding disc. When the roller section is ground, the roller is crushed, the bulk material is directly crushed, and the fine material is squeezed to form a bed for intergranular pulverization.The pulverized material continues to move toward the edge of the grinding disc until it is carried away by the strong airflow at the wind ring. Among the materials brought up by the airflow, the larger particulate material is again dropped onto the grinding disc under the action of its own gravity and continues to be pulverized. Then, the airflow enters the high-efficiency dynamic separator for powder classification. Under the action of the high-efficiency dynamic separator blades, the materials that do not meet the fineness requirements are returned to the grinding disc for grinding, and the materials meeting the fineness requirements are flowed through the pipeline. It is collected into the pulse dust collector and discharged through the discharge device to obtain the finished powder. When the hard-wearing material such as iron blocks mixed into the main body moves to the edge of the grinding disc, it cannot be blown by the wind due to its own weight. The scraper plate that is installed at the bottom of the grinding disc is scraped into the slag. After the mouth, drain the outside of the host.
You must first create an account to post.