kuangshanposui · 5 months ago
The market share of slag has increased in the areas of Limestone Sand Making Machine industrial production, cement production and new energy production. The slag producers seize the business opportunity and carry out deep processing of the slag. Broaden the application of the market through the production of slag powder of different fineness. Some major plants in industrial production are usually made from slag and refined into slag cement, slag powder, slag powder, slag Portland cement, slag wool, blast furnace slag, granulated blast furnace slag powder, copper slag and other materials. The finished product of the slag 400 is more widely used.The slag mill can Sand Making Machine Meets Customer Needs process slag products from 325 mesh to 3000 mesh, with uniform fineness and high output. The main part is composed of a main machine, a reducer, an analysis machine, a fan, a bypass dust collector, a maintenance platform and an electric control cabinet. The auxiliary machine part is composed of a jaw crusher, a bucket elevator, an electromagnetic vibrating feeder, a storage bin and the like. For the production of 400-mesh slag finished product, the working principle is that the main motor of the slag mill drives the main shaft and the turntable through the reducer, and the roller pin on the edge of the turntable drives dozens of grinding rolls to roll in the grinding ring raceway. The bulk slag material is crushed into small granules by a hammer crusher and then sent to the storage bin by the hoist, and then the material is evenly sent to the bulk tray of the upper part of the turntable through the vibration feeder and the inclined feed pipe.The material is scattered to the circumference of the circle under the action of centrifugal force, and falls into the raceway of the grinding ring of the slag mill. The ring is impacted, rolled and ground by the ring roller, processed into a powder through the processing of the three-layer loop, and the high-pressure fan is sucked. The function is to inhale the outside air into the machine, and bring the pulverized material into the slag mill powder sorting machine. The rotating impeller in the classifier re-grinds the coarse material, and the fine powder that meets the requirements enters the cyclone dust collector with the airflow and is discharged from the lower discharge valve, which is the finished product of the slag, while the airflow with a small amount of fine dust After being purified by a pulse dust collector, it is discharged through a fan and a muffler. Its production reflects the characteristics of high efficiency, energy saving, safety and reliability, environmental protection and energy saving, and promotes the renewal and widening of slag use. Accelerate the use of slag resources as much as possible.
You must first create an account to post.